UHM-1250TA
STANDARD ACCESSORIES
Linear scales on X,Y,Z axes
Spindle oil cooler
Automatic power off
Hydraulic system
Coolant system
Lubricator system
Alarm lamp
Work lamp
M.P.G.
RS232 interface
Heat exchanger
Chip conveyor and cart
Leveling bolts and pads
Controller manuals and circuit diagram
Operation manuals
Machine inspection lists
Splash guards (around the table)
Tool box
FANUC Oi MF
ATC: 40 tools
OPTIONAL ACCESSORIES
ATC: 60 tools
Oil mist device
Variety of controllers( FANUC / MELDAS /SIEMENS / HEIDENHAIN)
Various auxiliary work tables are available
Air conditioner for electrical cabinet
Coolant through spindle
Request Quote on This Model
Select Machine Size/Model Here
Technical Specifications
| MODEL | UNIT | UHM-1250TA | |
| TABLE | Table Size | mm | 1250X1250X360D(APC) |
| T-Slots | mm | 22X7 | |
| Maximum Load | kg | 5000 | |
| Indexing Degree | 1° | ||
| TRAVEL | X Axis | mm | 1600 |
| Y Axis | mm | 1600 | |
| Z Axis | mm | 1200 | |
| SPINDLE | Speed | rpm | 4000(6000,8000) |
| Taper | 7 / 24 taper ISO.50, BT-50 | ||
| DISTANCES | Spindle Center to Table | mm | 0~1600 |
| Spindle Nose to Table Center | mm | 370~1570 | |
| Height from ground to table surface | mm | 1330 | |
| FEED RATE | Rapid Feed rate X/Y/Z | m/min | 12 |
| Minimum Setting | mm | 0.001 | |
| Cutting Feed rate | mm/min | 1~5000 | |
| MOTOR | Spindle Servo Motor-cont./30min. | kW | 15/18.5(22/26) |
| X/Y/Z/B Servo Motors | kW | 4/4/4/4 | |
| Lubricator Motor | kW | 0.15 | |
| Hydraulic Pump | kW | 2.25 | |
| Coolant Pump | kW | 1.17 | |
| Chip Conveyor | kW | 0.2 | |
| Oil Cooler Pump | kW | 0.75 | |
| ATC | No. of Tools | pieces | 40(60) |
| Tool Selection | Absolute | ||
| Max. Tool (Diameter/Length) | mm | Ø125/Ø250(Without Adjacent Tool)/Length 400 | |
| Max. Tool Weight | kg | 18 | |
| Power Required | kVA | 45 | |
| MISCELLANEOUS | Pressurized Air | kg/cm² | 6 |
| Machine Weight(approx.) | kg | ||
Request Quote on This Model