UHM-2018WE
STANDARD ACCESSORIES
Linear scales on X,Y,Z axes
Spindle oil cooler
Automatic power off
Hydraulic system
Coolant system
Lubricator system
Alarm lamp
Work lamp
M.P.G.
RS232 interface
Heat exchanger
Leveling bolts and pads
Controller manuals and circuit diagram
Operation manuals
Machine inspection lists
Tool box
Splash guards (around the table)
SYNTEC PC Base 20MA-3E Controller
System include 10.4TFT monitor
Spindle speed 3500RPM
(Max. Gear ratio 1:8)
Oil Mist Device
OPTIONAL ACCESSORIES
X,Y,Z Axis linear scale( HEIDEHEIN,FAGOR)
Electrical Cabinet air condition device
Spindle Speed 4000RPM or 6000RPM (UHM-1210E,1512E,2016E)
Vice Controller box
Chip Conveyor & Chip Kart
Manual Rotary Table(UHM-1512E?2016E)
High Speed Tapping
Request Quote on This Model
Select Machine Size/Model Here
Technical Specifications
| MODEL | UNIT | UHM-2018WE | |
| TABLE | Table Size | mm | 1200X1200X72D(Manual) |
| T-Slots | mm | 22 | |
| Maximum Load | kg | 5000 | |
| TRAVEL | X Axis | mm | 2000 |
| Y Axis | mm | 1800 | |
| Z Axis | mm | 1400 | |
| W Axis | mm | 400(500) | |
| SPINDLE | Speed | rpm | 2500 |
| Taper | 7 / 24 Taper ISO.50, BT-50 | ||
| DISTANCES | Spindle Center to Table | mm | 0~1800 |
| Spindle Nose to Table Center | mm | 90~1890(-10~1890) | |
| Height from ground to table surface | mm | 1350 | |
| FEED RATE | Rapid Feed rate X/Y/Z | m/min | 12 |
| Minimum Setting | mm | 0.001 | |
| Cutting Feed rate | mm/min | 1~5000 | |
| MOTOR | Spindle Servo Motor-cont./30min. | HP | 25 |
| X/Y/Z/B Servo Motors | kW | 4.4/4.4/4.4 | |
| Lubricator Motor | kW | 0.15 | |
| Hydraulic Pump | kW | 2.25 | |
| Coolant Pump | kW | 1.17 | |
| Chip Conveyor | kW | 0.2 | |
| Oil Cooler Pump | kW | 0.75 | |
| MISCELLANEOUS | Power Required | kg/cm² | 40 |
| Pressurized Air | mm | 6 | |
| Machine Weight(approx.) | kg | 22000 | |
Request Quote on This Model