UDM-3216
STANDARD ACCESSORIES
Glass window type splash guard
Programmable coolant system
Automatic lubrication system
Spindle air blast system
Working lamp
Alarm lamp for abnormal situations
Indication lamp for dwell & end of job
Leveling bolts & pads
Chip auger & chain type chip conveyors
Toolbox with spanners & wrenches
M.P.G
Machine inspection lists
Operation manuals
Controller manuals and circuit diagram
Auto power off
RS-232C terminal interface
Spindle coolant system
Hydraulic system
Heat exchanger
FAGOR Controller
Request Quote on This Model
Select Machine Size/Model Here
Technical Specifications
| MODEL | UNIT | UDM-3216 | |
| TABLE | Table Size | mm | 3000x1400 |
| T-Slots Size | mm | 22 | |
| Maximum Load | tons | 9 | |
| TRAVEL | X Axis | mm | 3200 |
| Y Axis | mm | 1600 | |
| Z Axis | mm | 800(1000/1200) | |
| SPINDLE | Spindle Servo Motor- Cont./ 30min. | kW | 15/18.5 (22/26) |
| Speed | rpm | 4000(6000) | |
| Taper | 7/24 taper ISO.50, BT-50 | ||
| DISTANCES | Between Two Columns | mm | 1600 |
| Spindle Nose to Table Center | mm | 200~1000(200~1200, 200~1400) | |
| FEED RATE | Rapid Feed rate X/Y/Z | m/min. | 12/12/10 |
| Minimum Setting | mm/min. | 0.001 | |
| Cutting Feed rate | mm/min. | 1~5000 | |
| ATC | No. of Tools | pieces | (24/32/40/60) |
| Tool Change Time | sec. | 8(ARM TYPE) | |
| Max. Tool-Diameter/Length | mm | Ø125/Ø200(Without Adjacent Tool)/ Length 350 | |
| Max. Tool Weight | kg | 18 | |
| COOLANT & LUBRICATION | Coolant Tank Volume | L | 450 |
| Hydraulic Tank Volume | L | 70 | |
| Lubrication Tank Volume | L | 8 | |
| MISCELLANEOUS | Power Required | kVA | 50 |
| Pressurized Air | kg/cm² | 7 | |
| Hydraulics Required | kg/cm² | 70 | |
| Machine Weight(approx.) | tons | 27 | |
| Controller | FANUC 32i-B (FANUC-31i-B / MELDAS / SIEMENS / HEIDENHAIN) | ||
OPTIONAL ACCESSORIES:
| OPTIONAL ACCESSORIES: | |
| 8000RPM direct drive spindle(35HP) | |
| X,Y and Z axes with linear scales | |
| Auto. tool length & diameter measurement(TS27R) | |
| CNC rotary table | |
| Oil-feed holder | |
| Oil mist device | |
| Air conditioner for electrical cabinet | |
| FANUC 32i-B(31i-B)Controller | |
| MELDAS (M70,M720,M730) Controller | |
| HEIDENHAIN Controller | |
| 12000RPM or 15000RPM direct drive spindle-BBT 40(only for FANUC or MELDAS controller) |
Request Quote on This Model