MAXCUT MTC-25/0920
FEATURES
FAGOR 8055i FL TC CONTROL W ITH 10.4” LCD MONITOR
FAGOR SERVO SYSTEM WITH 25KW REGENERATIVE POWER SUPPLY
FULLY ENCLOSED SPLASH GUARD WiTH INTERLOCK SAFETY DEVICE
10” HYDRAULIC CHUCK MANUAL TOOL SETTER (Renishaw Probe)
PARTS CATCHER
HIGH PRESSURE COOLANT SYSTEM
AUTO LUBRICATION SYSTEM
HEAT EXCHANGER
PROGRAMMABLE TAILSTOCK
CHIP CONVEYOR
M30 PROGRAM STOP LIGHT
EXTRA SOFT JAWS
WORK LAMP
Request Quote on This Model
Specifications
| ITEM | MAXCUT MTC-25/0920 | |
| CAPACITY | UNIT | |
| Swing over bed | mm (in) | 508 (20.00) |
| Swing over cross slide | mm (in) | 230 (09.05) |
| Max. turning diameter (with turret) | mm (in) | 305 (12.00) |
| Max. turning length (with chuck) | mm (in) | 508 (20.00) |
| Bar Capacity | Kg (lb) | 65 (2.56) |
| TRAVEL | ||
| X axis | mm (in) | 215 (8.46) |
| Z axis | mm (in) | 514 (20.25) |
| SPINDLE | ||
| Spindle nose | A2-6 | |
| Spindle hole diameter | mm (in) | 65 (2.56) |
| Max. spindle speed | RPM | 4000 |
| Spindle taper | 1/20 | |
| Spindle motor – standard | KW (HP) | 11 (15) |
| Hydraulic chuck size | mm (in) | 200 (8) |
| Hydraulic pressure - max. | kgf/cm2 (PSI) | 30 (450) |
| TURRET | ||
| Turret type-Hydraulic | LS-200 | |
| Tool Numbers | 12 | |
| Boring bar dia. | mm (in) | 32 (1.26) |
| Square tool holder | mm (in) | 25 x 25 (1 x 1) |
| AXIS | ||
| X/Z axis rapid feed | m/min(ipm) | 30 (1181.10) |
| X axis servo motor | Nm (Ft-Lbs) | 11.6 (8.56) |
| Z axis servo motor | Nm(Ft-Lbs) | 11.6 (8.56) |
| ACCURACY | ||
| Positioning accuracy | mm (in) | 0.01 (0.0004) |
| Repeatability accuracy | mm (in) | 0.005 (0.0002) |
| TAILSTOCK | ||
| Tailstock quill dia. | mm (in) | 65 (2.56) |
| Tailstock travel | mm (in) | 425 (16.73) |
| Quill taper | M.T. | 4 |
| Quill travel | mm (in) | 50 (1.97) |
| MACHINE SIZE | ||
| Length with Chip conveyor | mm (in) | 3280 (129.13) |
| Width | mm (in) | 1820 (71.65) |
| Height | mm (in) | 1680 (66.14) |
| Machine weight | Kgs (lbs) | 3200 (7040) |
Tool Holder Packages (included)
|
Facing tool holder for 1” tool x 1
PCS |
|
Gibb & Spacer for 1” tool x 4 PCS |
|
Boring bar holder x 2 PCS |
|
Boring bar holder (coolant through)
x 1 PCS |
|
1/2”, 5/8”, 1” sleeve, each x 1 PCS |
|
Tool set & box, Leveling
pads |
TOOL SETTER
|
The tool setter has a
touch sensor that can measure
varying tool lengths and detect broken
tools. It can be easily programmed to
store all the tool information to
reduce tool changing time. |
 |
LIVE TURRET (OPTIONAL)
|
Tool shank diameter |
|
VDI 30 |
|
Square tool holder |
mm (in) |
20 x 20
(3/4 x 3/4) |
|
Power rating |
Kw (HP) |
3.0 (4.0) |
|
Maximum speed |
rpm |
4000 |