BAXTER 475HDP
HEAVY DUTY SEMI-AUTOMATIC HORIZONTAL BANDSAW
The model 475HDP is ideal for cutting solids. The machine has a large 1½” (41mm) blade driven by a 7½ hp (5 kW) motor. Full stroke hydraulic vise is standard.
Request Quote on This Model
Specifications
| CUTTING CAPACITY | |
| Round | 18″ (475 mm) |
| Round at 45 degrees | 13 3/8″ (340 mm) |
| Rectangular | 18″ x 25″ (475 x 635 mm) |
| SPECIFICATIONS | |
| Blade Size | 1 1/2″ x 17′ 5″ (41 x 5309 mm) |
| Blade Speeds (continuously variable) | 60 to 400 ft/min (18 to 122 m/min) |
| Blade Tension (spring compensated) | 30,000 psi (207 MPa) |
| Blade Guides | Carbide with rollers |
| Table Height | 26 1/4″ (670 mm) |
| Maximum Work Load | 4,500 lb. (2050 kg) |
| Machine Weight | 2,800 lb. (1090 kg) |
| Overall Dimensions | 9’6”x5’x8′(2895x1500x2400 mm) |
| DRIVE | |
| Blade Drive | 7.5 Hp (5 kW) |
| Hydraulic Drive | 1 Hp (.75 kW) |
| Voltages available (three phase) | 575 or 460 |
FEATURES INCLUDED AS STANDARD EQUIPMENT
- Double column machine provides maximum capacity and rigidity
- Design utilizes linear bearings for high stiffness and smooth motion
- Electronic variable speed
- Blade breakage and open door automatic shut off with alarm indicator
- Hydraulic lift of the saw head
- Saw up travel can be set to minimize distance between the blade and the top of the material
- Saw down travel can be set to allow notching of blocks
- Semi-automatic cut cycle
- Manual saw control, saw up, rapid saw down, saw cut
- Cutting feed rate hydraulically adjusted
- Load sensing valve stops the feed if the blade starts to overload, typical cutting structural shapes
- Magnetic motor starter with automatic shut off at the end of cut, motors with thermal overload protection
- Power disconnect on machine
- Blade guards
- Powered blade brush to remove cutting chips
- Quick acting material clamping
- Miter cuts up to 45 degrees by swiveling vise
- Adjustable material length stop for repetitive cutting
- Steel wheels
- Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
- Flood coolant system to both saw guides with adjustable flow rates
- Direct blade drive using a planetary gear box for a high efficiency design
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
Options
Conveyor