2500 QM
MAXCUT UNIVERSAL MILLING MACHINE STANDARD FEATURES Rapid traverse on "X", "Y" & "Z" axis. Table swivels ±45° degrees left & right Motorized ARM/RAM elec. Motor is 3.75KW (5.5HP) Horizontal spindle elec. Motor is 5.5KW (7.5HP) Long Horizontal milling arbour two over arm supports manual drawbars Coolant pump Chip tray
Request Quote on This Model
Specifications
| ITEM | MAXCUT 2500 QM | |
| TABLE | Table area | 1500x350mm (59x13.7") |
| Number of "T" shaped slots | 5-16H7 | |
| Distance between "T" shaped slots | 60mm | |
| Rotary movement of table in both direction | 45° | |
| TRAVERSE | Automatic Longitudinal | 1150mm (46") |
| Automatic cross | 400mm (15 3/4") | |
| Automatic Vertical | 500mm (20") | |
| Available distance from spindle to overarm | 155mm (6") | |
| SPINDLE (horizontal) | Housing of the taper spindle | ISO-40/50 |
| Diameter of the main Shaft nose | 88.88-128.57mm | |
| Milling arbor diameter (*) | 27mm or (1") | |
| Number of speeds of the spindle (R.P.M.) | 12(40-1800) 50HZ | |
| FEEDS | Longitudinal and cross feeds | 10-1208mm (0.4-47") |
| Vertical feed | 5-604mm (0.2-23") | |
| RAPID TRAVERSE | Longitudinal and cross | 1208mm (47")/min (60HZ) |
| Vertical | 604mm (23")/min | |
| MOTORS | Main motor HP | 7.5 |
| Feed motor HP | 2.5 | |
| COOLANT | Cooling-pump HP | 1/8 (0.10) |
| MOTORIZED OVERARM | Housing of the taper spindle | ISO-40/50 |
| Number of speeds | - | |
| Speed range (R.P.M) | (35-1600) 50HZ | |
| Power HP | 5 | |
| WEIGHT AND DIMENSIONS | Maximum weight on table | 600kg (1320 lb) |
| Net weight | 3200kg (7040 lb) | |
| Gross weight with seapacking case | 3400kg (7480 lb) | |
| Cubical measure of packing | 184x227x227cm (70x89x88") | |
OPTIONAL ACCESSORIES:
10HP motor for Horizontal spindle
Brake motor with Vertical & Hor. 5.5HP / 7.5HP
Brake motor with Ver. & Hor. 5.5HP & 10HP
Brake motor with Horizontal 7.5HP
AC auto feed for over arm
Air Power Draw Bar #50 with Horizontal
Air Power Draw Bar #50 with Vertical
Variable speed: Horizontal spindle
Variable speed: Vertical Spindle
AL-500S Power Feed X / Y Axis