DMV-6030
Double Column Machining Center 3-5 Axis Simultaneous
Standard Features & Accessories:
1. Glazed window type slash guard
2. Programmable coolant system
3. Automatic lubrication system
4. Spindle air blast system
5. M.P.G.
6. Work lamp
7. Alarm lamp
8.RS-232 terminal interface port
Request Quote on This Model
Select Machine Size/Model Here
Specifications
| MODEL | UNIT | DMV-6030 |
| TRAVEL: | ||
| X AXIS | MM | 6200 |
| Y AXIS | MM | 3100 |
| Z AXIS | MM | 700 (900, 1100, 1300) |
| DISTANCES: | ||
| BETWEEN TWP COLUMNS | 3030 | 3030 |
| SPINDLE TO TABLE TOP | MM | STD. LONG NOSE 130-830 (130-1030, 130-1230, 130-1430) OPT. SHORT NOSE 240-940 (240-1140, 240-1340, 240-1540) |
| TABLE TOP TO FLOOR | MM | 915 |
| TABLE: | ||
| OVERALL SIZE | MM | 6000 X 2600 |
| T-SLOTS | MM | 22 |
| MAXIMUM LOAD | KGS | 23000 |
| X AXIS SLIDEWAY | 2 ROLLER BEARING + 2 LIEAR BEARING | |
| SPINDLE RAM: | ||
| TRANSMISSION | TYPE | DIRECT COUPLING |
| TAPER | BT-50 (DIN,69817) (CAT-50) | |
| SPEED | RPM | 40-6000 |
| RAM SECTION | MM | 380 X 380 (420 X 420) |
| TYPE | BOX WAY 8 SURFACE CONTACTED (4 ROLLER GUIDEWAYS) | |
| FEEDRATE: X Y Z | ||
| CUTTING FEEDRATE | MM/MIN | 1-8000 |
| RAPID FEEDRATE | MM/MIN | 10(12) / 10(12) / 10(12) |
| MINIMUM SETTING | MM | 0.001 |
| COOOLANT & LUBRICATION: | ||
| COOLANT TANK VOLUME | LITER | 26 |
| HYDRAULIC TANK VOLUME | LITER | 120 |
| LUBRICATION TANK VOLUME | LITER | 6 |
| ACCURACY: | ||
| POSITIONING | MM | 0.025 |
| REPEATABILITY | MM | 0.02 |
| ROUNDNESS | MM | 0.02MM / Ø300MM |
| MISCELLANEOUS: | ||
| POWER | KVA | 60 |
| PNEUMATIC | KG/CM2 | 5 |
| WEIGHT | KGS | 70000 |
Request Quote on This Model